![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278032.webp)
20
2.2
Using the Ethernet Interface
If you want to use the Ethernet interface, you need to install the optional interface card (100Base-TX,
10Base-T or 10Base-5) first. This section explains the procedure for installing the Ethernet interface card
and for connecting by the Ethernet interface.
2.2.1
Installing the Ethernet interface card
Check that the display window indicates "Ready". Turn the power off and then unplug the
power cord.
CAUTION
Make sure the power is switched off and the machine unplugged before you begin the
installation. Otherwise, there is a danger of electric shock.
The printing data left inside the printer or the printer memory will be erased when
the power is off.
Remove the two screws from the slot for the
expansion interface card and then take away
the shield cover.
Keep the removed screws and shield
cover.
Insert the interface card into either the left
or right slot and fix it with the two screws.
Make sure the card is inserted right in
so that it touches the connector at the
end of the slot.
Summary of Contents for Document Centre 400 series
