![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278046.webp)
34
3.5
Removing Documents
Output to the Stacker Tray
When removing documents output to the Stacker Tray, be sure to press the Pause/Restart button of the
Staple Finisher to stop the Finisher operations temporarily.
The procedure is as follows:
Press Pause/Restart.
Check that the Stacker Tray has lowered all
the trays completely before removing the
documents output to the stacker tray.
During printing of documents that are
to be stapled, when Pause/Restart or
of the main body is pressed, the
stacker tray will be lowered once the
documents that are being printed are
output.
Press Pause/Restart again.
The Staple Finisher will resume operation.
The temporarily stopped state will be
cancelled automatically about 60
seconds later and printing will resume.
Summary of Contents for Document Centre 400 series
