Xerox Document Centre 400 series, User Manual, Page: 54 / 185

42
4
4.2 Installing/Uninstalling the Printer Drivers
The "End User Licence Agreement" dialog box appears. Read through the licence
agreement carefully. If you have no objections to it, click on the checkbox for "I
accept the terms of the above Licence Agreement" and then click Next.
The "Ready to Start Copying" dialog box appears. Click Finish to start the
installation.
After the installation is completed, a dialog box as shown below appears.
Click Restart Windows Now, Exit to Windows or Printer Setup as needed.
"4.3 Configuring the Printer Drivers" on how to configure the printer driver.
• Restart Windows for the effect to take place.
• You may run the "Setup.exe" program to install the Windows 95/98 printer
driver as an alternate driver on the Windows NT server (workstation) after
you have installed the printer driver for Windows NT 4.0. In this case, as
there is no need to restart Windows, click Exit to Windows. When down-
loading the alternate Windows 95/98 driver installed in Windows NT on the
Windows 95/98 client computer, use the "Add Printer Wizard" dialog box.