![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278031.webp)
19
Setting Up
2
2.1 Connecting Cable (Parallel/Serial Interface)
Similarly, check the values of the host device for the following items and change the
settings when they are different from the printer default values:
•
Baud Rate
(default: 9600)
•
Data Length
(default: 8 bit)
•
Stop Bit
(default: 1 bit)
•
Parity
(default: None)
•
Xon-Xoff Control
(default: Yes)
•
DTR Control
(default: Fix-High)
If necessary, set the value for the following items. However, there is no need to change
the default setting for these items for normal usage.
•
PDL Mode
(default: PCL 6*)
•
PJL Switch
(default: ON)
•
Auto Eject Time
(default: 30 sec)
•
Serial memory**
(default: 64 KB)
"Chapter 5 Mode Menu/Common Menu" for details on the setting items of the printer.
• * If the optional PostScript software kit is installed, factory setting will be Auto.
• ** Maintenance Mode>Memory Change>ReceiveBufferMem>Serial
Summary of Contents for Document Centre 400 series
