![background image](http://html1.mh-extra.com/html/xerox/document-centre-400-series/document-centre-400-series_user-manual_3905278064.webp)
52
4
4.3 Configuring the Printer Drivers
Paper Output Options
Specify the optional output tray that can be attached to your printer for additional capacity
over the standard output tray.
Side Output Tray
Select this if your printer is installed with this face-up tray.
Staple Finisher
Select this if your printer is installed with this attachment of three finisher trays
(Stacker Tray 1- Stacker Tray 3). It is equipped with the Offset Catch Device and
the stapler. Cannot be installed together with the Mail Box.
Mail Box
Select this if your printer is installed with this attachment of 10 output bins. Cannot
be installed together with the Staple Finisher.
• If Side Output Tray is not checked, Side Output Tray will not be available for
Paper Output on the "Paper/Output" tab.
• If Staple Finisher is not checked, Stacker-Auto and Stacker Tray 1 - Stacker
Tray 3 will not be available for Paper Output on the "Paper/Output" tab.
• If Mail Box is not checked, Mail Box Bin 1 - Mail Box Bin 10 will not be
available for Paper Output on the "Paper/Output" tab.
Offset Catch Device
Select this if your printer is installed with the job offset device which supports both "Offset
Per Job" and "Offset Per Set" functions. Only the standard Centre Tray and the stacker
trays can be equipped with the job offset device. Default is off.
If this is not checked, the job offset settings will not be available for Job Offset on
the "Output Options" tab.
Duplex Unit (Inverter)
Select this if your printer is installed with a duplex unit to perform 2-sided printing. Default
is off.
If this is not checked, the duplex printing options on the "Paper/Output" tab will
not be available.
Hard Disk
Select this if your printer is installed with a hard disk which enables the printer to support
job collation. Default is off.
If this is not checked, Collate and the staple positions on the "Output Options" tab
will not be available.
Fax Unit
Select this if your printer is installed with a fax unit to send a fax job. Default is off.
If this is not checked, Fax will not be available for Job Type on the "Paper/Output"
tab.
ISDN/G4 Kit
Select this if your fax module has a G4 kit which allows ISDN communication. Enabled
only if Fax Unit is selected. Default is off.
If this is not checked, G4-Auto will not be available for Communication Mode on
the "Comm. Setting" dialog box which is displayed when Comm. Settings on the
"Fax Recipient" dialog box is pressed.
Summary of Contents for Document Centre 400 series
