Xerox ColorQube 9303, User Manual

Page: 46 / 352

Log In / Out
ColorQube™ 9301/9302/9303
Copy 46
Log In / Out
If Authentication or Accounting has been enabled on the device, you may need to log in before using
some or all of the services. A picture of a lock on a button indicates that you must log in to use that
service.
1. To log in select the Log In/Out button
on the control panel. Selecting a
locked service will also prompt you to
enter a log in name and password.
2. Use the keyboard to enter your User
Name
, then select the
Next
button.
3. Use the keyboard to enter your
Password , then select the Enter
button.
4. If an accounting system is in use on
the device, you may also need to
enter additional information.
• If Xerox Standard Accounting is
enabled, the user will also have
to log in using their Xerox
Standard Accounting details.
• If Network Accounting is enabled, the user must enter a User ID and an Account ID.
• If a Foreign Device Interface (FDI) is installed, you are prompted to access via the device
installed, for example a card reader or coin slot.
Your user details display in the User
Details area on the right side of the
message display.
5. To log out, select the Log In/Out
button again or select the User
Details area and select
Log Out from
the drop-down menu.
6. A confirmation screen is displayed,
select
Log Out or Cancel .