Xerox ColorQube 9303, User Manual

Page: 282 / 352

Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting 282
Quick Setup Home
This option is used to quickly setup your
device with the key information required in
order to start using the features and
functions.
Select the Quick Setup Home option to
access the following settings:
• IP Address Settings on page 282
• Contact Numbers on page 283
IP Address Settings
Use to enter the IP Address Settings for
the system. There are several screens for
entering the IP Address information, select
the
Next option to view further screens.
• IPv4 is used to select IPv4 protocol.
Select Enabled to activate this setting.
• IPv6 is the new standard protocol for
the internet. If you are unsure which
IP setting to use, select
Enabled for
both IPv4 and IPv6.
• Select Next to continue to the next
screen.
• Get IP Address from a DHCP Server is used if you want to have an IP address automatically
assigned to this device.
• Use a Static IP Address is used if you know the IP address you want to assign to the device.
• Select the option required then select Next to continue to the next screen.
• Enter the IPv4 Address , Subnet Mask , Host Name and Gateway information by selecting each of
the fields in turn. A numeric keypad is displayed for numeric entries or a keyboard is displayed for
text entries.
• Select Next to continue to the next screen. A completion screen is displayed with instructions for
printing a configuration report if required. Select Done to exit.
• Select another option to program or select Close to return to the previous screen.