Xerox 4213, User Manual

Page: 223 / 441

SUPPLIES: ORDERING INFORMATION
Notes
•
Downloaded fonts are not interchangeable between different
emulations.
•
Downloaded fonts are lost when you switch emulations
through the printer control panel, Mode Change Key (MCK)
commands. Refer to the Rank Xerox 4213 Laser Printer
Programmer Reference for information on the printer
commands used to switch emulations.
•
Downloaded fonts are removed from the memory of the
printer if you switch the printer off. When downloaded fonts
are deleted, the default font is the active font for the printer.
•
A limited amount of memory is available in the printer. You
need to leave enough memory for printing your jobs. If too
many fonts are downloaded at the same time, the printer
deletes some downloaded fonts in order to continue
printing.
•
If after downloading fonts you switch to another emulation
other than LJ2D or XES and print a font status sheet, the
downloaded fonts are not listed on the status sheet.
Downloading fonts
1. Make sure the correct emulation is selected.
2. Download fonts using the utility supplied with the fonts, or
applications programme.
3. If required, use the printer menus to print a font status sheet
and confirm that fonts are correctly downloaded.
Font cartridges
Font cartridges are another way of increasing the number of
typefaces and sizes the printer can output. Font cartridges are
small plug-in modules that contain a range of fonts.
7-2 XEROX 4213 LASER PRINTER USER GUIDE