Xerox 4213, User Manual

Page: 21 / 441

INSTALLATION
Power requirements
Keep the following points in mind as you secure the power
supply for your printer:
•
Use only the AC power cord supplied with the machine.
•
Avoid the use of a multi-plug adaptor to plug multiple power
plugs into the same outlet.
•
Make sure that the total electrical current does not exceed
the required safety standards, if equipment other than the
printer is plugged into the same outlet.
Table 1-1. Power requirements
Voltage
(Frequency)
Multinational
(50/60 Hz)
US/Canada
(50/60 Hz)
Minimum 198 108
Normal 220 - 240 115
Maximum 264 132
Installation procedure
This section contains step by step instructions for the following
tasks relating to the installation of your 4213 laser printer:
•
Unpack and confirm the parts.
•
Place the printer in its permanent location.
•
Install the developer (C) and the toner cartridges (B).
•
Connect the 4213 laser printer to the host.
Note: You must provide your own interface cable.
•
Connect the power cord. (May be in a separate container)
•
Install the paper trays.
•
Print a configuration sheet.
XEROX 4213 LASER PRINTER USER GUIDE 1-5