Xerox 4213, User Manual

Page: 62 / 441

USING THE 4213 MENUS
When any of the conditions above occur, the following message
appears in the message display for a short time.
PLEASE WAIT
Soon, the message
READY
appears, and the 4213 is ready to print.
Notes
•
2 hours and 8 minutes is the maximum amount of time (and
the factory preset default) for the 4213 to be inactive before
entering the Power Saver mode (if this feature is enabled).
•
Only a qualified service representative can change this factory
preset default.
Chime
The Chime menu item determines whether the audible tone will
sound. If enabled, the chime is heard one time or repeats
continuously any time an internal fault requiring operator
intervention occurs in the printer.
If a warning condition exists, the 4213 may sound only one long
beep. The chime options apply only to fault conditions.
The Chime menu item options are listed below as they appear in
the message display:
CHIME
ONCE* (DISABLED, CONTINUOUS or ONCE)
Output Offset
The Output Offset menu item determines whether or not
offsetting in the output tray is allowed. When Output Offset is
disabled, no offsetting is allowed, even if the job asks for it.
Emulation commands to offset the output are ignored. Disabling
output offset allows more sheets to be stacked in the output
tray.
If this item is enabled and when the job asks for it, the individual
job is offset from the previous job in the output tray. This
function is regulated by the offset commands for the emulation.
3-10 XEROX 4213 LASER PRINTER USER GUIDE