manualshive.com logo in svg

Xerox 4213, User Manual

Share
Download
Xerox 4213 User Manual Download Page 191

CARE AND MAINTENANCE

4.

Take the new print cartridge out of the box and remove it
from the packaging.  Take particular care not to touch the
shiny, blue surface of the print cartridge.  Damage to the
blue surface can cause print defects.

5.

Remove the protective sheet and drier.

Caution:  Be careful not to get fingerprints or scratches on the
surface of the blue print drum.

6.

Line up the new print cartridge with the cavity in the top
cover. Make sure the green handle is at the top and facing
you.

5-48

XEROX 4213 LASER PRINTER USER GUIDE

Summary of Contents for 4213


























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands