Xerox 4213, User Manual

Page: 86 / 441

USING THE 4213 MENUS
Selecting the LJ2D emulation configuration options
7. After selecting LJ2D as the current emulation, use the
following buttons on the control panel to move through the
different menu levels:
B
•
Use the Test button to move to the next lower menu
level.
C
•
Use the Last Page button to move the display to the right
to show the menu options/headings at the same level.
When you display the last heading/option available for
the menu item, pressing this button again will wrap
around to show the first heading/option in the list.
D
•
Use the Select button before you initiate changes to
numeric entries, such as, COPIES, FONT NUMBER and
FORM LENGTH.
A
•
Use the Menu button to move to the next higher menu
level.
D
•
Use the Select button to select a displayed option.
When an option is selected, an asterisk (*) appears next
to the option in the display.
Note: The asterisk does not appear when the Select button
is used to select a numeric entry, such as, COPIES, FONT
NUMBER and FORM LENGTH.
8. Use either of the following buttons to exit the menu:
A
•
Use the Menu button repeatedly, until you exit the Main
Menu. The printer is in the off line mode. The online
indicator light is not lit.
H
•
Use the Online button to exit the menu. The printer is in
the online mode. The online indicator light is lit.
Note: You must access the Reset Menu to save your selected
options as the default setting to be in place each time the printer
is switched on.
Saving the LJ2D emulation configuration
You must exit the Main Menu and access the Reset Menu to save
your selections as the default configuration for the LJ2D
emulation.
3-34 XEROX 4213 LASER PRINTER USER GUIDE