wsm Kubota L4100, Workshop Manual

Page: 64 / 346

GENERAL L4100, WSM
G-49
(EU)
(2) Rear Wheels
Rear tread width can be adjusted as shown with the standard
equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and left) to the
desired position, and tighten the bolts.
IMPORTANT
• Always attach wheels as shown in the drawings
• If not attached as illustrated, transmission parts may be
damaged.
• When re-fitting or adjusting a wheel, tighten the bolts to the
following torques then recheck after driving the tractor
200 m (200 yards) and 10 times of shuttle movement by 5 m
(5 yards), and thereafter according to service interval.
9Y1210278GEG0079US0
Models
13.6 – 26
Farm
1145 mm
(45.1 in.)
1235 mm
(48.6 in.)
1335 mm
(52.6 in.)
1340 mm
(52.8 in.)
Tightening torque
Front wheel mounting bolt
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 lbf·ft
Rear wheel mounting bolt
and nut
197 to 225 N·m
20.0 to 23.0 kgf·m
145 to 166 lbf·ft
(1) Tread
(2) Front Wheel Mounting Bolt (3) Rear Wheel Mounting Bolt and NUt
KiSC issued 08, 2012 A