ENGINE
L4100, WSM
1-S47
(EU)
Idle Gear Side Clearance
1. Set a dial indicator with its tip on the idle gear.
2. Measure the side clearance by moving the idle gear to the front
and rear.
3. If the measurement exceeds the allowable limit, replace the idle
gear collar.
9Y1210278ENS0127US0
Camshaft Side Clearance
1. Set a dial indicator with its tip on the camshaft.
2. Measure the side clearance by moving the cam gear to the front
to rear.
3. If the measurement exceeds the allowable limit, replace the
camshaft stopper.
9Y1210278ENS0073US0
Oil Clearance between Idle Gear Shaft and Idle Gear Bushing
1. Measure the idle gear shaft O.D. with an outside micrometer.
2. Measure the idle gear bushing I.D. with an inside micrometer,
and calculate the oil clearance.
3. If the oil clearance exceeds the allowable limit, replace the
bushing.
If it still exceeds the allowable limit, replace the idle gear shaft.
9Y1210278ENS0074US0
Replacing Idle Gear Bushing
(When removing)
1. Press out the used idle gear bushing using an idle gear bushing
replacing tool.
(When installing)
1. Clean a new idle gear bushing and idle gear bore, and apply
engine oil to them.
2. Press in a new bushing using an idle gear bushing replacing
tool, until it is flush with the end of the idle gear.
9Y1210278ENS0075US0
Idle gear side clearance
Factory specification
0.15 to 0.25 mm
0.0059 to 0.0098 in.
Allowable limit
0.90 mm
0.035 in.
Camshaft side clearance
Factory specification
0.070 to 0.22 mm
0.0028 to 0.0086 in.
Allowable limit
0.30 mm
0.012 in.
Oil clearance between
idle gear shaft and idle
gear bushing
Factory specification
0.025 to 0.066 mm
0.00099 to 0.0025 in.
Allowable limit
0.10 mm
0.0039 in.
Idle gear shaft O.D.
Factory specification
37.959 to 37.975 mm
1.4945 to 1.4950 in.
Idle gear bushing I.D.
Factory specification
38.000 to 38.025 mm
1.4961 to 1.4970 in.
(A) When Removing
(B) When Installing
KiSC issued 08, 2012 A
Summary of Contents for Kubota L4100
