wsm Kubota L4100, Workshop Manual

Page: 181 / 346

TRANSMISSION L4100, WSM
3-S18
(EU)
Three Point Linkage and ROPS
1. Upper ROPS (1) with safety strap (2).
2. Remove check chains (8), top link (5), lift rods (6) and lower
links (7).
3. Remove the lower ROPS (4).
(When reassembling)
9Y1210278TRS0010US0
Rear Wheels and Seat
1. Place the disassembling stand under the clutch housing and
transmission case.
2. Loosen and remove the rear wheels mounting screws and nuts.
3. Remove the rear wheels.
4. Remove the seat (1).
9Y1210278TRS0011US0
Step and Center Cover
1. Disconnect foot accelerator rod (1).
2. Disconnect differential lock pedal (2).
3. Remove the mat (6), the step (5), 4WD grip (4) and center cover
(3).
9Y1210278TRS0012US0
Tightening torque
ROPS
mounting
screw
M14 screw
167 to 196 N·m
17.0 to 20.0 kgf·m
123 to 144 lbf·ft
M12 screw
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
ROPS fulcrum screw
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 101 lbf·ft
(1) Upper ROPS
(2) Safety Strap
(3) ROPS Fulcrum Screw
(4) Lower ROPS (5) Top Link
(6) Lift Rod
(7) Lower Link
(8) Check Chain
Tightening torque
Rear wheel mounting
screw and nut
197 to 225 N·m
20.0 to 23.0 kgf·m
145 to 166 lbf·ft
Rear wheel mounting stud
bolt
98.1 to 112 N·m
10.0 to 11.5 kgf·m
72.4 to 83.1 lbf·ft
(1) Seat
(1) Foot Accelerator Rod
(2) Differential Lock Pedal
(3) Center Cover (4) 4WD Grip
(5) Step
(6) Mat
KiSC issued 08, 2012 A