wsm Kubota L4100, Workshop Manual

Page: 63 / 346

GENERAL L4100, WSM
G-48
(EU)
9. TIRES
[1] TIRE PRESSURE
Though the tire pressure is factory-set to the prescribed level, it
naturally drops slowly in the course of time. Thus, check it everyday
and inflate as necessary.
Recommended inflation pressure
Maintain the pressure shown below.
WARNING
To avoid personal injury:
• Do not attempt to mount a tire on a rim. This should be
done by a qualified person with the proper equipment.
• Always maintain the correct tire pressure. Do not inflate
above the recommended pressure shown in the operator's
manual.
9Y1210278GEG0055US0
[2] TREADS ADJUSTMENT
CAUTION
• When working on slopes or working with trailer, set the wheel tread as wide as practice for the job for
maximum stability.
• Support tractor securely on stands before removing a wheel.
• Do not work under any hydraulically supported devices. They can settle, suddenly leak down, or be
accidentally lowered. If necessary to work under tractor or any machine elements for servicing or
adjustment, securely support them with stands or suitable blocking beforehand.
• Never operate tractor with a loose rim, wheel, or axle.
9Y1210278GEG0056US0
(1) Front Wheels
Front tread can not be adjusted.
IMPORTANT
• Do not turn front discs to obtain wider tread.
• When re-fitting or adjusting a wheel, tighten the bolts to the following torques then recheck after driving
the tractor 200 m (200 yards) and 10 times of shuttle movement by 5 m (5 yards), and thereafter according
to service interval.
9Y1210278GEG0057US0
Tire sizes Inflation Pressure
Rear 13.6-26, 4PR 100 kPa (1.0 kgf/cm
2
, 16 psi)
Front 8.00-16, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
(1) Ground (A) Insufficient
(B) Standard
(C) Excessive
(D) Bad
Tire 8 – 16 Farm
Tread
1145 mm
(45.1 in.)
KiSC issued 08, 2012 A