wsm Kubota L4100, Workshop Manual

Page: 231 / 346

FRONT AXLE L4100, WSM
6-S2
(EU)
2. SERVICING SPECIFICATIONS
9Y1210278FAS0030US0
Item Factory Specification Allowable Limit
Front Wheel Alignment Toe-in 2 to 8 mm
0.08 to 0.32 in.
–
Front Wheel Axial Sway Less than
5.0 mm
0.20 in.
–
Spiral Bevel Pinion Shaft Turning Torque 0.98 to 1.1 N·m
0.10 to 0.12 kgf·m
0.73 to 0.86 lbf·ft
–
Differential Case, Differential Case Cover to
Differential Side Gear
• Differential Case
• Differential Case Cover
Clearance
I.D.
I.D.
0.0500 to 0.151 mm
0.00197 to 0.00594 in.
32.000 to 32.062 mm
1.2599 to 1.2623 in.
32.000 to 32.025 mm
1.2599 to 1.2608 in.
0.20 mm
0.0079 in.
–
–
Pinion Shaft to Differential Pinion
• Pinion Shaft
• Differential Pinion
Clearance
O.D.
I.D.
0.0640 to 0.100 mm
0.00252 to 0.00393 in.
13.950 to 13.968 mm
0.54922 to 0.54992 in.
14.032 to 14.050 mm
0.55244 to 0.55314 in.
0.25 mm
0.0098 in.
–
–
Differential Pinion to Differential Side Gear Backlash 0.10 to 0.30 mm
0.0040 to 0.0118 in.
0.40 mm
0.016 in.
Spiral Bevel Pinion Shaft to Spiral Bevel
Gear Backlash 0.10 to 0.30 mm
0.0040 to 0.0118 in.
–
Bevel Gear to Bevel Gear Backlash 0.15 to 0.35 mm
0.0059 to 0.0138 in.
0.60 mm
0.024 in.
Front Axle Case Boss (Front) to Bracket
Bushing
• Front Axle Case Boss (Front)
• Bushing
Clearance
O.D.
I.D.
0.120 to 0.275 mm
0.00473 to 0.0108 in.
49.950 to 49.975 mm
1.9666 to 1.9675 in.
50.095 to 50.225 mm
1.9723 to 1.9773 in.
0.50 mm
0.020 in.
–
–
Front Axle Case Boss (Rear) to Bracket
Bushing
• Front Axle Case Boss (Rear)
• Bushing
Clearance
O.D.
I.D.
0.16 to 0.377 mm
0.0063 to 0.0148 in.
70.000 to 70.035 mm
2.7559 to 2.7573 in.
70.195 to 70.377 mm
2.7636 to 2.7707 in.
1.0 mm
0.039 in.
–
–
KiSC issued 08, 2012 A