wsm Kubota L4100, Workshop Manual

Page: 98 / 346

ENGINE L4100, WSM
1-S26
(EU)
Cylinder Head Cover
1. Remove the lead (1).
2. Remove the breather hose (2).
3. Remove the head cover screws (3).
4. Remove the cylinder head cover (4).
(When reassembling)
• Check to see if the cylinder head cover gasket is not defective.
9Y1210278ENS0031US0
Injection Pipes
1. Loosen the screws on the pipe clamps (1).
2. Detach the injection pipes (2).
3. Remove the inlet manifold (3).
(When reassembling)
• Blow out dust inside the pipes.
9Y1210278ENS0032US0
Hydraulic Pump and Other External Components
1. Remove hydraulic pump mounting screws and detach hydraulic
pump (1).
2. Remove the accelerator cable (2), hour meter flexible cable (3).
9Y1210278ENS0033US0
Tightening torque Cylinder head cover screw
6.87 to 11.2 N·m
0.700 to 1.15 kgf·m
5.07 to 8.31 lbf·ft
(1) Lead
(2) Breather Hose
(3) Head Cover Screw
(4) Cylinder Head Cover (5) Cylinder Head Cover Gasket
(6) Breather Valve
(7) Plate
Tightening torque Injection pipe retaining nut
25 to 34 N·m
2.5 to 3.5 kgf·m
18 to 25 lbf·ft
(1) Pipe Clamp
(2) Injection Pipe (3) Inlet Manifold
(1) Hydraulic Pump
(2) Accelerator (3) Hour Meter Flexible Cable
KiSC issued 08, 2012 A