FRONT AXLE
L4100, WSM
6-M2
(EU)
2. FRONT WHEEL ALIGNMENT
To assure smooth mobility or maneuverability and enhance stable and straight running, the front wheels are
mounted at an angle to the right, left and forward directions. This arrangement is referred to as the Front Wheel
Alignment.
9Y1210278FAM0002US0
Camber
The front wheels are tilted from the vertical as
viewed from the front, upper wheels are spreader than
lower ones.
This inclinations is called camber
(a)
. Camber
reduces bending or twisting of the front axle caused by
vertical load or running resistance, and also maintains
the stability in running.
9Y1210278FAM0003US0
Kingpin Angle
The kingpin is titled from the vertical as viewed from
the front.
This angle is called kingpin angle
(a)
. As with the
camber, kingpin angle reduces rolling resistance of the
wheels, and prevents any shimmy motion of the steering
wheel.
it also reduces steering effort.
9Y1210278FAM0004US0
Caster
The kingpin is titled forward as viewed from the side.
The point
(b)
of the wheel center line is behind the point
(a)
of the kingpin shaft center line.
This inclination is called caster
(c)
. Caster helps
provide steering stability.
As with the kingpin inclination, caster reduces
steering effort.
9Y1210278FAM0005US0
Camber
Factory
specifica-
tion
0.070 rad
4 °
Kingpin
Factory
specifica-
tion
0.218 rad
12.5 °
Caster
Factory
specifica-
tion
0.026 rad
1.5 °
F: Front
R: Rear
KiSC issued 08, 2012 A
Summary of Contents for Kubota L4100
