wsm Kubota L4100, Workshop Manual

Page: 148 / 346

CLUTCH L4100, WSM
2-S13
(EU)
Main Gear Shift Lever
1. Shift main gear shift lever (1) to neutral position.
2. Unscrew mounting screws and remove main gear shift base (2).
(When reassembling)
• Apply grease to the O-rings (3) and take care not to damage it.
9Y1210278CLS0036US0
Separating Mid Case from Transmission Case
1. Loosen and remove screws and nuts securing mid case (2) to
transmission case (3).
2. Separate mid case from transmission case (3).
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint
face of mid case and transmission case after eliminate water, oil
and stuck liquid gasket.
9Y1210278CLS0013US0
Separating Clutch Housing from Mid Case
1. Remove screw and nuts securing clutch housing to mid case.
2. Separate the clutch housing (1) from mid case (2).
(When reassembling)
• Replace the gasket with a new one.
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint
face of the clutch housing and mid case.
9Y1210278CLS0014US0
Tightening torque
Main gear shift lever base
mounting screw
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
(1) Main Gear Shift Lever
(2) Main Gear Shift Lever Base (3) O-ring
Tightening torque
Mid case and transmission
case mounting screw and
nut 103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 86.7 lbf·ft
Mid case and transmission
case mounting stud bolt
40 to 49 N·m
4.0 to 5.0 kgf·m
29 to 36 lbf·ft
(1) Clutch Housing
(2) Mid Case (3) Transmission Case
Tightening torque
Clutch housing and mid
case mounting nut
103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 86.7 lbf·ft
Clutch housing and mid
case mounting screw
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Clutch housing and mid
case mounting stud bolt
40 to 49 N·m
4.0 to 5.0 kgf·m
29 to 36 lbf·ft
(1) Clutch Housing (2) Mid Case
KiSC issued 08, 2012 A