wsm Kubota L4100, Workshop Manual

Page: 24 / 346

GENERAL L4100, WSM
G-9
(EU)
4. LUBRICANTS, FUEL AND COOLANT
*KUBOTA original transmission hydraulic fluid.
9Y1210278GEG0075US0
No. Place Capacity Lubricants, fuel and coolant
1 Fuel
42.0 L
11.1 U.S.gals
9.24 Imp.gals
• No. 2-D diesel fuel
• No. 1-D diesel fuel if temperature
is below –10 °C (14 °F)
2 Coolant
6.5 L
6.9 U.S.qts
5.7 Imp.qts Fresh clean water with anti-freeze
3
Engine crankcase
(with filter)
7.6 L
8.0 U.S.qts
6.7 Imp.qts
Engine oil
Refer to next page
• Below 0 °C (32 °F)
SAE10W, 10W-30 or 15W-40
• 0 to 25 °C (32 to 77 °F)
SAE20, 10W-30 or 15W-40
• Above 25 °C (77 °F)
SAE30, 10W-30 or 15W-40
4 Transmission case
40.0 L
10.6 U.S.gals
8.80 Imp.gals KUBOTA UDT or SUPER UDT fluid*
5 Front axle case
6.5 L
6.9 U.S.qts
5.7 Imp.qts
KUBOTA UDT or SUPER UDT fluid*
or SAE 80-90 gear oil
Greasing
No. Place No. of greasing point Capacity Type of grease
6
Front axle support 2
Until grease overflows
Multipurpose grease
NLG1-2 or NLG1-1
(GC-LB)
Top link 2
Top link bracket
2 [with draft control
(if equipped)]
Battery terminal 2
Lift rod 1
KiSC issued 08, 2012 A