background image

Warranty Coverage : 

 

 

 

 

 

 

 

 

DAEDONG, Industrial Co., Ltd DAEDONG Tractor Division, herein referred to as  DAEDONG, undertakes to replace or repair any part of 

DAEDONG loader where damage has been proven to be caused by defects in material or workmanship.

This Warranty is valid for a period of 1 year from the date of the original retail sale. Parts replaced or repaired under the terms of this War-
ranty are guaranteed only until the original warranty expires. Warranty only applies to the original purchaser.

It is further understood and agreed that the defect should be immediately reported to the Selling Dealer. The Selling Dealer will generally 
perform Warranty repairs or replacements and the Purchaser shall deliver the  

DAEDONG loader to the Dealer’s place of business for re-

pair.

The obligation of  

DAEDONG to the Purchaser under this Warranty is  limited to the repair or replacement of defective parts by an autho-

rized  

DAEDONG dealer. Repair or replacement in accordance with this Warranty shall constitute fulfillment of all liabilities of  DAEDONG 

and the Selling Dealer in respect to  

DAEDONG loader.

There are no warranties beyond those which expressly appear herein. Any implied warranty of merchantability or fitness for a 
particular purpose is specifically excluded here from. 

WARRANTY CONDITIONS

KL135-00.indd   1

2013-02-01   오전 11:15:35

Summary of Contents for KL135





























































































































Reviews: