WinGD X62DF, Maintenance Manual

Page: 388 / 902

23.2 Put on the applicable personal protective equipment.
23.3 Operate the chain block (002) to lower the connecting rod (001) to the floor.
23.4 Remove the chain.
23.5 Attach the two chain blocks (002 and 006, Figure 8-21 ) to the connecting rod
(003) and the shackles (005).
23.6 Lift the connecting rod (003) a small distance.
23.7 Attach two more shackles (009) to the top platform.
23.8 Attach two more chain blocks (007, 008) to the connecting rod (003) and
shackles (009) as shown in step B.
23.9 Operate carefully the chain blocks (002, 006, 007, 008) to move the connecting
rod.
23.10 Attach and remove the chain blocks (002, 006, 007, 008) and shackles (005,
009) as given in
Step 23.9 to continue to move the connecting rod a sufficient
distance (step C).
23.11 Lower the connecting rod (003) to the floor.
23.12 Attach the engine room crane to the connecting rod (003).
23.13 Remove the chain blocks (002, 006, 007, 008) and shackles (005, 009).
23.14 Operate the engine room crane to lift and move the connecting rod to an
applicable area, for example into storage.
X72DF
AA00-3303-00AAA-520A-A
Maintenance Manual Connecting rod - remove
Winterthur Gas & Diesel Ltd.
- 388 - Issue 002 2020-10