![background image](http://html1.mh-extra.com/html/warema/climatronic-control-panel-3-series/climatronic-control-panel-3-series_installation-and-connection_3373670012.webp)
2017717_b•en•2016-11-01
We reserve the right to make technical changes
12
WAREMA climatronic® 3.x
Installation and connection
4.2 Nnstalling base plate for control panel
The control panel is intended to be surface-mounted on a level substructure.
Install the base plate with the rectangular opening in front of a flush-mounted
switch box. Screws and screw anchors are enclosed.
Align the base plate exactly horizontally with the help of the oblong holes.
Countersink the 4 countersunk head screws included with the delivery until
they are flush to allow the control panel to fully engage.
A temperature sensor is integrated in the control panel itself. Therefore,
to prevent erroneous readings, do not install the control panel where a
heat source may influence the measurements (solar radiation, radiator,
outside wall).
170 mm
76 mm
4x
min. 120 - 150 mm
ca. 1450 mm
Fig. 4
Installation of the base plate
Once connected the control panel can be engaged in the base plate. See
chapter 5.1 Connecting control panel on page 17
.