2017717_b•en•2016-11-01
We reserve the right to make technical changes
17
5.1 onnecting control panel
Connect the control panel according to the following diagram; observe the
colours of the connection terminals.
X5
X6
X7
JY(St)Y 4×2×0.8 mm ∅
Bus A
Bus B
0 V
24 V DC
to other
bus devices
climabus
Bus A
Bus B
controlbus to WAREMA climatronic®
WebControl (optional)
WH
YL
BK
RD
BU
OG
Terminating resistors 120 Ω
Fig. 8
Control panel wiring diagram
The connection terminals (black/red) are already fitted with a 120 Ω
terminating resistor.
If the control panel is not mounted at the end of the bus, use the connection
terminals supplied in the accessories box instead.
Attach the control panel to the base plate by hooking it on the top edge of
the base plate and then pushing against the bottom edge until it snaps into
place.
Fix the control panel with the supplied screw, which is turned into the centre
of the bottom edge.
The control panel is now securely mounted to the wall.
The RS 485 interface is used for connecting a WAREMA climatronic®
WebControl. The connection terminals (blue/orange) are already fitted with a
120 Ω terminating resistor. See also
chapter 7.11 on page 56.
