2017717_b•en•2016-11-01
We reserve the right to make technical changes
35
7.3 Switch actuator 16M230 SMN DP/EGN
The switch actuator 16M230 SMI is an electronic control device with an
SMI interface for the operation on a WAREMA climatronic®.
The switch actuator and its downstream power consumer are supplied with
230 V AC. The connected products are controlled via the
WAREMA climatronic®; an on-site control device with operating elements is
also a possibility.
Either a maximum of 6 D370 SMI motors, protected via the integrated
6.3 AT H miniature fuse (maximum total power 1300 VA), or 16 motors
without fuse protection, can be connected to the SMI interface. A maximum
of 8 groups can be controlled. When movement is requested, the device first
switches on the voltage of the SMI drives and then sends, with a time delay,
the SMI telegrams to the drives.
In addition, the switch actuator has button inputs and general purpose inputs
(e.g. for locking inputs or group buttons).
To operate the switch actuator 16M230 SMI, a WAR MA climatronic® 2.0
control panel or newer is needed.
In the default settings, the connected single push buttons operate in dead
man's mode; activation of a single push button initiates movements in all
connected motors.
Group buttons and locking contacts are functional after the actuator is
commissioned.
Install the actuator as described in
chapter 4.4 on page 15
.
Use the
wiring diagram on page 44
to connect the actuator.
Detailed information on connecting can be found in the associated
installation instructions art. no. 2003271.
