WAGO I/O SYSTEM 750 750-671, Manual

Page: 253 / 256

Overview of Error Blink Codes • 253
Auxiliary Commands
WAGO-I/O-SYSTEM 750
I/O Modules
Index
Dec. Hex.
Variable Value
27 0x1B Current position (internal offset)
28 0x1C Current position (internal OffsetSampled)
29 0x1D Current position (internal LastPosition)
30 0x1E Last target position
31 0x1F Acceleration factor
32 0x20 Position error
33 0x21 Current output frequency (internal)
34 0x22 Current position (internal CPLD emulation)
35 0x23 0
36 0x24 0
37 0x25 0
38 0x26 0
39 0x27 0
40 0x28 0
41 0x29 Move program command counter
42 0x2A EEPROM status
43 0x2B Specified velocity
44 0x2C Maximum velocity
45 0x2D Final velocity
46 0x2E 0
47 0x2F Stop deceleration
48 0x30 Priority of current command (internal)
49 0x31 Current acceleration
50 0x32 Current deceleration
51 0x33 Acceleration modification (path, time)
52 0x34 Deceleration modification (path, time)
53 0x35 Ramp mode
54 0x36 Maximum velocity (internal)
55 0x37 Prescaler velocity
56 0x38 Present current factor
57 0x39 Original status for camshaft 1 ... 9
58 0x3A Reference run status
59 0x3B Reference run limit switch contact status
60 0x3C Referencing speed (internal)
61 0x3D Reference run: Creep speed