VOX electronics BBM-4406, Instruction Manual, Page: 9 / 197

is still too high
（
accompanied by 5 beep sounds
）
. Then the program has to be stopped.
Open the lid and let the machine cool down for 10 to 20 minutes.
2
、
If the display shows
“
L LL
”
after pressing the START/STOP button ( except the
programs BAKE), it means the temperature inside is too low
（
accompanied by 5 beep
sounds, stop sound by pressing the START/STOP button, open the lid and let the
machine rest for 10 to 20 minutes to return to room temperature.
3. If the display shows “ E rr
” after you have pressed
START/STOP, the temperature
sensor is disconnected please check the sensor carefully by Authorized expert.
FOR THE FIRST USE
1. Please check if all parts and accessories are complete and free of damage.
2. Clean all the parts according to the latter section
“
Cleaning and Maintenance
”
3. Set the bread maker in baking mode and bake empty for about 10 minutes. After cooling
it down clean once more.
4. Dry all parts thoroughly and assembly them, so the appliance is ready for using.
USING YOUR BREAD MAKER
1. Place the pan in its position, turn it clockwise until it clicks into right position. Fix the
kneading blade onto the drive shafts. It is recommended to fill holes with heat-resisting
margarine prior to placing the kneaders, as this prevents the dough from sticking to the
kneaders and helps with removing the kneaders from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe.
Usually the water or liquid substance should be put firstly, then add sugar, salt and flour,
always add yeast or baking powder as the last ingredient.
Note: the maximum quantities of the flour and yeast which may be used refer to the recipe.
NOTE : The maximum quantity of flour and yeast separately is 490g and 6g.
3. Make a small hole on one side of the flour with your fingers. Place yeast into the hole,
ensure it does not come into contact with the liquid ingredients or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the
Menu button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
7. Press the LOAF SIZE button to select the desired size.
8. Set the delay time by pressing TIME button. This step may be skipped if you want the
bread maker to start working immediately.
9. Press the START/STOP button to start working, and the working light comes on.
10. For the program of Basic, French, Whole wheat, Sweet, Gluten free, Sandwich
and Butter milk, 10 beep sound will be heard during operation. This is to prompt you to
add ingredients. Open the lid and put in some ingredients. It is possible that steam
Yeast or soda
Dry ingredients
Water or liquid