XX091-01-01 Rev 902 AurorAcorD
Reference
•
73
VAC units. 6 A, 32 VAC, 3 AG in-line type located inside near the
front panel.
Radio Frequency Emission Rating:
FCC Class A and EN55022.
RECORDING/PLAYBACK/ARCHIVING
Recording Rate:
System rate can be set to 1-15 and maximum (approx. 25 frames
per second).
Note: The system-recording rate must be divided among the total number of system cameras to obtain an approximate per camera frame
rate.
Recording Time:
Approximately 7 days of recording onto a 40 Gb hard disk with
normal quality/sensitivity settings and 12 fps system recording rate
with approximately 8 hours per day of activity independent of the
number of active camera channels. See Reference chapter.
Recording Quality:
5 settings; Highest, High, Normal, Low and Lowest.
Recording
Sensitivity:
5
settings; Highest, High, Normal, Low and Lowest.
Recording
Capacity:
4
configurations; 40, 80, 120 and 160 GB.
Playback Control:
Jog/Shuttle front panel concentric knob allows control of video
playback speed and direction.
Recording Management:
Utility provided to erase data on hard disk.
Playback Capability:
16 channels of recorded video may be played back simultaneously
with a single synchronous audio channel.
Archiving Capability:
All 16 channels of recorded video, one audio channel and
alarm/time/titling information may be archived to the optional internal
CD-RW drive in a proprietary format. The CD-R/CD-RW disks may
be played back on AurorAcorD or the AurorAcorD CD Player
software. One selected video channel may be exported to the
internal floppy disk drive in a hybrid AVI format with no audio. The
floppy disks may be played back on AurorAcorD or on a PC Pentium
grade computer Windows Media Player
or the AurorAcorD Floppy
Player.
VIDEO
Video System:
NTSC: RS-170, 525 lines, 30 frames/sec.
PAL: 625 lines, 25 frames/sec.
Video Input, Output Signals:
Composite video: 1.0 V p-p (140 IRE), consisting of 714 mV (100
IRE) of luminance and 286 mV (40 IRE) of negative-going sync.
Y/C input, output:
1.0 V p-p Y signal (Y = luminance) plus 400 mV C signal (C =
chrominance or color) over separate conductors.
Horizontal Resolution:
NTSC VGA: 720 pixels, 540 lines.
BNC: 640 pixels, 480 TV lines.
PAL: 640 pixels, 480 TV lines.
Video Crosstalk:
Less than 50 dB at 4.2 MHz.
Video Inputs:
16; terminated with 75 ohms.
Looping Video Outputs:
1 looping output for each camera input using the provided cable
assemblies.
Monitor Outputs:
2 monitor outputs for digitally processed video, 1 BNC, 1 VGA (for
multiscreen displays, video special effects, etc.). 1 monitor output for
unprocessed analog video. Provides sequential switching, hold
viewing of selected cameras and time, date, titling.
VIDEO FUNCTIONS
Multiscreen Displays:
Refer to figure below.
Summary of Contents for AurorAcord
Page 2: ......
Page 3: ......
Page 13: ...x XX091 01 01 Rev 902 AurorAcorD This page intentionally left blank ...
