Vicon AurorAcord, Instruction Manual

Page: 77 / 90

64
•
Reference XX091-01-01 Rev 902 AurorAcorD
AurorAcorD CD Programs
The AurorAcorD CD, supplied in your accessory kit, contains four programs:
•
CD Player, used to play back AurorAcorD CDs
•
Floppy Player, used to play back AurorAcorD floppy disks
•
Calculator, used to calculate recording duration settings, and
•
Codec, a driver needed to playback AurorAcorD floppies using Windows Media Player.
CD Player
Video and audio data may be played back on a PC using the AurorAcorD CD Player. Data must have been
archived to CD using the Archive CD function. In order to record and subsequently play back audio, audio
recording must be enabled and the audio AGC must be set. The File and Options Menus are shown below.
Select Open to open a video file with extension DAT.
You may send this video image to a printer using Print Screen.
Exit the AurorAcorD CD Player using this command.
Place a check mark beside Continuous Play to play the file
repeatedly until the Stop button is pressed. Remove the check mark
to play the file once.
Select NTSC or PAL video mode. Changing the video mode will
close the AurorAcorD CD Player program. When you restart the
program, the new video mode will be selected.