Vicon AurorAcord, Instruction Manual

Page: 58 / 90

XX091-01-01 Rev 902 AurorAcorD Operation
•
45
Press
ZOOM
–
to zoom out. When you are completely zoomed out on a scene, press
ZOOM
–
to exit PTZ (or press a
camera number).
Freezing and Restoring Video Images
To freeze or restore video, toggle the
FREEZE
key. The first press of the
FREEZE
key freezes all windows in multi-
picture displays. Enter 1-16 to indicate the window number to restore video or press
FREEZE
again to restore all
windows. The Freeze LED will blink and the screen grid will pulsate as indicators that your video is in freeze
mode. Freezing multi-picture display windows of the same camera lets you freeze one window while keeping
the other active or view windows of the same camera video that were frozen at different times.
Controlling Mechanical Pan, Tilt, Zoom Functions
Using mechanical pan/tilt/zoom (MPTZ), an operator can use a receiver to control the zoom in/out functions
of the camera lens and to control the pan/tilt of the pan-and-tilt drive. You may view outside the original scene
by panning or tilting, unlike digital pan, tilt, zoom. Other functions are available in MPTZ, such as recalling and
storing presets. This convenient function allows you to return to a pre-defined pan-and-tilt position (and
zoom/focus settings, if the camera includes a motorized zoom lens). The pan-and-tilt drive and lens must be
equipped with preset potentiometers in order to use preset functions. Use the table below to store (define) a
preset and to recall (run) a preset.
Note: Mechanical PTZ is available on either the main display or spot monitors. If Digital Zoom Update is set to
Frame, then the maximum digital zoom is 16x. If set to Field, the maximum is 8x.
Sequencing Video
Note: Refer to Defining and Selecting Display Formats. Sequences may be run on the spot or main display monitors.
Start a video sequence as shown below. The Auto Only, Manual Only, Auto+Manual parameters are defined
during window configuration, as discussed in Defining and Selecting Display Formats.
•
For Auto Only mode: Press
SEQUENCE
to start the display of sequencing video at the sequence dwell
rate,
•
For Manual Only mode: Press
SEQUENCE
and then press
ENTER
to advance one sequence step.
AUX1
FOCUS
+
AUX2
FOCUS
–
AUX3
IRIS
+
AUX4
IRIS
–
AUX5
AUTO
IRIS
AUX6
AUTO
PAN
LENS
SPEED
HOME
MECHANICAL PAN TILT ZOOM
PAN/TILT
SPEED
PRESET
Press to toggle
through
available lens
speeds.
Press to activate
auxiliary receiver
devices. Press
again to deactivate
latching devices.
Press and hold for 5
seconds to access pan/tilt
speed settings table.
Press to step through
choices 1-4.
•
•
Press to go to
p/t drive's home
(preset 1)
position.
Press then
enter preset number.
Use "10" for "0".
Press to start.
Pan or tilt to interrupt
movement to preset
position.
Press then
to store a
preset.
PRESET
PRESET
ENTER
PLAY
Press to start/stop
autopanning.
To change autopan
speed: press and
hold and
then press .
•
•
AUTO
PAN
PAN/TILT
SPEED
Lens Control
•
•
•
•
•
DISPLAY
ZOOM
+
ALARM
ZOOM
–
SEQUENCE
MECH
P/T ZOOM
RECORD
SPOT
MONITOR
LIVE PLAY
Use to pan
left and right.
Use to control
zoom function.
Use to tilt up
and down.
Press to invoke
mechanical ptz.
If in mpd mode,
choose a window.
Press again
to leave mptz mode.
•
•
•
MECH
P/T ZOOM