Vicon AurorAcord Instruction Manual Download Page 76

Page: 76 / 90

XX091-01-01 Rev 902 AurorAcorD

Reference

•

Can the AurorAcorD be controlled by the A2K-KBD Keyboard or System Console?

Yes, it can be

controlled from up to 16 combined System Consoles or A2K-KBD Keypads. It is necessary to use the current
model of the System Console (V1400X-DVC-3), which has the ability to control up to 16 AurorAcorDs. Each
AurorAcorD uses one device address and one VCR address.

Can I review the CD-R on a conventional PC?

Yes. Use the AurorAcorD CD Player, provided in the

accessory kit.

Can I review the floppy on a conventional PC?

Yes. Use the AurorAcorD Floppy Player, provided in the

accessory kit. You may also use Windows Media Player with the proper driver installed.

How much recording time is available on a floppy disk?

The floppy holds 1.4 MB. Typically, this will yield

a single channel/5 minute video segment.

Does the AurorAcorD have the ability to only record cameras that are alarmed based on
motion/activity?

Yes. By changing the parameters in the Record/Playback Setup submenus, the recorder

can be set up to perform as an event recorder only.

What type of authentication is used on the AurorAcorD?

It does a basic data validity check.

Can the hard drive be upgraded at the enduser’s site?

No. The AurorAcorD must be returned to Vicon for

this type of upgrade.

Reference

Accessory Kit

Your accessory kit (Vicon part number 1298-3039-03) should contain the following items. Contact Vicon at 1-
800-645-9116 for missing parts.

Item

Purpose

Qty

Vicon Part No.

120 VAC Power Cord

Connects the unit to an appropriate power source.

1806-5249-03-00

230 VAC Power Cord

Connects the unit to an appropriate power source.

1806-5249-02-00

Brackets

Mounts unit to an equipment rack.

1298-5157-01-00

Handles AurorAcorD

handles.

1298-5211-01-00

Fuse, 0.64 A, slo-blow

Fuse for 230 VAC units.

8001-7392-08-00

Mounting Feet Kit

Mounting feet for AurorAcorD unit.

1298-3189-01-00

Cable, RJ45-RJ45, 10 ft

Used with COM 1 or COM 2 ports.

1806-5381-02-00

RS-232/RS-422 RJ45
Termination Box

Used to connect to RJ-45 connectors.

1298-3140-01-00

RJ-45 AurorANet
Termination Box

Used to connect to RJ-45 connectors for AurorANet
& to define end-of-line device.

1 1298-3190-01-00

37-Pin Connector, Male

Connector for alarm inputs. An inner shield and an
outer shield are included.

1 8000-8593-01-00

Ferrule, 747580-4 AMP

Reinforces cable-to-connector junction. Used with
37-pin connector, inner diameter 0.375-0.432
inches.

1 8000-8594-01-00

Contacts, Pin

Used in 37-pin connectors.

8000-9571-00-00

Jumpers

Used to change Com 1/Com 2 protocol defaults or
to define RS-485 end-of-line.

7 8000-9536-03-00

Screws

Screws for mounting unit to a rack.

8003-7334-01-00

Screws

Screws for attaching handles.

8003-7361-00-00

AurorAcorD CD-ROM

Version 2.0 Software: Codec Driver, Floppy Player,
CD Player, Calculator.

1 1298-3198-02-00

Summary of Contents for AurorAcord



























































































Search results

Summary of Contents for AurorAcord

Reviews:

Related manuals for AurorAcord

Brands by name

Popular brands

Vicon AurorAcord, Instruction Manual

Search results

Summary of Contents for AurorAcord

Reviews:

Related manuals for AurorAcord

Brands by name

Popular brands