Vicon AurorAcord, Instruction Manual

Page: 52 / 90

XX091-01-01 Rev 902 AurorAcorD Operation
•
39
7. If you wish to use the factory defaults for sequencing settings (refer to the table at the end of this section),
select Use Sequencing Defaults). Otherwise, continue with the sequencing procedure below.
8. Select the Sequence field and define the appropriate action:
•
Auto Only, which will sequence cameras in the Sequence List one after another,
•
Manual Only, which steps through each camera in the list when the
ENTER
key is pressed,
•
Auto+Manual, which sequences cameras in the Sequence List one after another and allows
you to manually step through cameras by pressing the
ENTER
key
•
Off, which defines no sequencing
Note: Refer to the Sequencing section for more information on running sequences.
9. Select Sequence Dwell and define the length of time that video will display onscreen before switching to
the next camera in the sequence.
10. Define the number of cameras in the sequence using the Sequence Steps field.
11. Select Define Sequence List to display the following screen.
1 Step 1: 1 Camera 01
2 Step 2: 2 Camera 02
3 Step 3: 3 Camera 03
4 Step 4: 4 Camera 04
5 Step 5: 5 Camera 05
6 Step 6: 6 Camera 06
7 Step 7: 7 Camera 07
Step 8: 8 Camera 08
SEQUENCE LIST – WINDOW 1
to Choose. to Go Back.
or 1-16 to Select.
12. Define the order that cameras will be displayed when a sequence starts. For example, to display that
camera 1 displays every other step, select Camera 1, Camera 2, Camera 1, Camera 3, and so forth. The
number of lines on this screen is determined by how many sequence steps you defined in the previous
steps.
13. Select
LIVE
twice. Then select
SETUP
to complete the configuration of the windows for this display format.
14. Return to step one and repeat this procedure to define each window of each multi-picture display format.
15. Then select full screen display by selecting any camera.
16. Press
SETUP
and perform steps 6-12.
17. Press
LIVE
twice to exit window configuration screens.
Screen Field Choices Default
Main Display
Window
Configuration Camera Number 1-16 1
Camera Title Alphanumeric characters available in
the title editor character set. Camera “XX”, “XX” is
the camera number
Update Priority High, Normal Normal
Sequence Auto Only, Manual Only, Auto +
Manual, Off Off
Sequence Dwell 1, 2, 3, 5, 10, 15, 30, 60 seconds 1 second
Sequence Steps 1 – 16 16
Sequence List Step “XX”, where “XX”
is the step number 1-16 1-16 in ascending
camera number order