Vicon AurorAcord, Instruction Manual

Page: 44 / 90

XX091-01-01 Rev 902 AurorAcorD Programming
•
31
Motion “Museum” Search
Using the Playback Control screen’s Playback Search submenus, the AurorAcorD allows you to search
through video recorded to the hard disk or archived to the CD-RW by three methods:
•
by a user-defined time and date
•
alarm video
•
motion detected in specified zones on a specified camera.
Use the following procedure to perform motion “museum” search through recorded video.
Note: You may find it convenient to use the spot monitor to view the results of a museum search while
maintaining other operations on the main display monitor.
1. Access the Playback Search screen as shown in the following menu path.
1 Time: 08:37:26 AM
2 Date: 07/24/01
3 Start Search
TIME + DATE SEARCH
to Choose. to Go Back.
or 1-16 to Select.
15 0/7/18 09:18:41a VLOSS ON
HARD DISK ALARM SEARCH
Press to go Back
1 Record Setup
2 Playback Setup
RECORD/PLAYBACK SETUP
to Choose. to Go Back.
or 1-16 to Select.
1 Start Playback
2 Stop Playback
3 Select Source: Hard Disk
4 Playback Search
5 Playback Audio: OFF
6 Audio Volume: 5
PLAYBACK CONTROL
to Choose. to Go Back.
or 1-16 to Select.
1 Time + Date Search
2 Alarm Search
3 Motion Search
PLAYBACK SEARCH
to Choose. to Go Back.
or 1-16 to Select.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Setup
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
2. To search by time and date, access the Time + Date Search screen. Enter the time that the video you
wish to review was recorded or archived.
3. Select the Date field and set the appropriate date. The date will be in the format selected in the
Time/Date Setup screen (American, European, Asian).
4. Select Start Search.
5. To search through video recorded during an alarm state, return to the Playback Search menu and select
Alarm Search.
6. From the Alarm Search screen, use the up/down arrow keys to select an alarm (only one alarm is shown
in the menu path above). Then use the right arrow key to play the video recorded during the selected
alarm.
7. Return to the Playback Search screen and use the menu path shown here to access the Playback Motion
Search screen.
1 Record Setup
2 Playback Setup
RECORD/PLAYBACK SETUP
to Choose. to Go Back.
or 1-16 to Select.
1 Start Playback
2 Stop Playback
3 Select Source: Hard Disk
4 Playback Search
5 Playback Audio: OFF
6 Audio Volume: 5
PLAYBACK CONTROL
to Choose. to Go Back.
or 1-16 to Select.
1 Time + Date Search
2 Alarm Search
3 Motion Search
PLAYBACK SEARCH
to Choose. to Go Back.
or 1-16 to Select.
1 Camera: 1
2 Define Motion Zones
4 Motion Sensitivity: Normal
3 Start Search
PLAYBACK MOTION SEARCH
to Choose. to Go Back.
or 1-16 to Select.
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
– – – – – – – – – – – – – – –
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
* * * * * * * * * * * * * * *
to choose a row.
1-16 to turn zone On/Off.
ZOOM+/ZOOM– row On/Off.
to test zone activity.
to Go Back.
PLAY MOTION ZONE SETUP
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
8. Select the camera number using the Camera field.