16
•
Programming
XX091-01-01 Rev 902 AurorAcorD
1 Rcvr 1 CommF: Enabled
2 Rcvr 2 CommF: Enabled
3 Rcvr 3 CommF: Enabled
4 Rcvr 4 CommF: Enabled
5 Rcvr 5 CommF: Enabled
6 Rcvr 6 CommF: Enabled
7 Rcvr 7 CommF: Enabled
Rcvr 8 CommF: Enabled
RCVR COM FAIL
to Choose. to Go Back.
or 1-16 to Select.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
1 Serial Port 1: PRN/Host
2 Serial Port 2: Receiver
3 More AurorAnet Setup
4 More Host Setup
5 Print Alarms: NO
6 Rcvr Comm Fail
SERIAL PORT SETUP
to Choose. to Go Back.
or 1-16 to Select.
2. Follow the onscreen instructions to enable or disable the communication failure message. The message
will display as “CommF”. To clear the announcement of the message, press and hold
ENTER
and then
press Alarm.
Setting Receiver Type and Status Display
Note: The factory defaults are Always On for the display of receiver status messages on the Main Display and
Spot monitors. You do not need to set the Receiver Status field if you want the receiver status
message to always display on all (main display and spot) monitors.
The Receiver Types are set to Other Receiver for all cameras as the factory default. If your receivers
have more than four pan-and-tilt speeds, such as Surveyor domes, or for fixed speed receivers, you do
not need to change this setting.
Use the following procedure to set the receiver status display on the monitors and to define the receiver
types.
1. Access the Main Display Title Text screen as shown in the menu path below.
1 Main Display Title Text
2 Main Display Menu Text
3 Main Display Grid
4 Main Display Video
5 Spot Monitor Title Text
DISPLAY SETUP
to Choose. to Go Back.
or 1-16 to Select.
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
1 Char Border:
ON
2 Char Background: OFF
3 Time Display:
Always On
4 Date Display:
Always On
5 Camera Title:
3 sec fade
6 Rcvr Status:
Always On
SPOT MONITOR TITLE TEXT
to Choose. to Go Back.
or 1-16 to Select.
1 Title Font:
2 Text Color:
3 Border Color:
4 Background Color:
5 Time Display:
6 Date Display:
7 Camera Title:
Rcvr Status:
Small
BrWHITE
BLACK
VIDEO
Always On
Always On
3 sec fade
Always On
MAIN DISPLAY TITLE TEXT
to Choose. to Go Back.
or 1-16 to Select.
MENU SELECTION
to Choose. MENU to Exit.
or 1-16 to Select.
1 Easy Setup Menu
2 Main Menu
3 Camera Calibration
4 Save/Restore Menu
5 Language
6 FAQ Screen
7 About AurorAcorD
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
2. Set the Receiver Status to always display (Always On), never display (Always Off) or to disappear from
the screen after a specified number of seconds (1, 2, 3, 5, 10, 15, 30, 60 Second Fade).
3. Access the Receiver Type screen as shown below.
1 Display Setup
2 Camera Setup
3 Alarm Setup
4 Serial Port Setup
5 Time/Date Setup
6 Record/Playback Setup
7 System Setup
8 Disk Functions
MAIN MENU
to Choose. to Go Back.
or 1-16 to Select.
1 Camera 1: Other Rcvr
2 Camera 2: Other Rcvr
3 Camera 3: Other Rcvr
4 Camera 4: Other Rcvr
5 Camera 5: Other Rcvr
6 Camera 6: Other Rcvr
7 Camera 7: Other Rcvr
Camera 8: Other Rcvr
CHANGE RECEIVER TYPES
to Choose. to Go Back.
or 1-16 to Select.
1 Camera Calibration
2 Camera Titles
3 Update Priorities
4 Receiver Types
5 Motion Setup
6 Fine Tune
CAMERA SETUP
to Choose. to Go Back.
or 1-16 to Select.
RECEIVER TYPES
to Choose. to Go Back.
or 1-16 to Select.
1 Change Receiver Types
2 Set all to 1301R w/ PV opt
3 Set all to Other Rcvr
4. If all of your receivers have 4 pan-and-tilt speeds, select Set all to V1301R w/PV option. If you have fixed
(1) speed and variable-speed receivers (such as Surveyor domes), select Set all to Other Receiver. If you
Summary of Contents for AurorAcord
Page 2: ......
Page 3: ......
Page 13: ...x XX091 01 01 Rev 902 AurorAcorD This page intentionally left blank ...
