ViaSat ArcLight, User Manual, Page: 317 / 368

ArcLight Hub User’s Guide
Component Operating Procedures
Rev. 001 1081006 5-65
Step Display or
Function
Procedure/Description Front Panel Display
Enter near
frequency kilo-
symbols per
second
Press right arrow key to view current
kilo-symbols per second. To change,
press ENTER and use numeric keys to
select parameter. The Clear key can be
used to reset the displayed entry to its
original value. Press ENTER when
correct kSym/s is displayed.
NearFsym(kSym/s)
Enter Longitude of
PCMAHC Press right arrow key to view current
longitude. To change, press ENTER and
use numeric keys to select longitude.
The Clear key can be used to reset the
displayed entry to its original value.
Press ENTER when correct longitude is
displayed.
Longitude (degr)
Enter Latitude of
PCMAHC Press right arrow key to view current
latitude. To change, press ENTER and
use numeric keys to select latitude. The
Clear key can be used to reset the
displayed entry to its original value.
Press ENTER when correct latitude is
displayed.
Latitude (dgr)
Enter Longitude of
satellite Press right arrow key to view current
longitude of satellite. To change, press
ENTER and use numeric keys to select
satellite longitude. The Clear key can be
used to reset the displayed entry to its
original value. Press ENTER when
correct satellite longitude is displayed.
SatLongitude (d)
Enter minimum
delay
[Optional: can be used in place of
Latitude/Longitude/Sat. Longitude].
Press right arrow key to view current
minimum delay. To change, press
ENTER and use numeric keys to select
minimum delay. The Clear key can be
used to reset the displayed entry to its
original value. Press ENTER when
correct minimum delay is displayed.
MnDelay(usec)
Enter maximum
delay [Optional: can be used in place of
Latitude/Longitude/Sat. Longitude].
Press right arrow key to view current
maximum delay. To change, press
ENTER and use numeric keys to select
maximum delay. The Clear key can be
used to reset the displayed entry to its
original value. Press ENTER when
correct maximum delay is displayed.
MaxDelay(usec)
Enter output
power Press right arrow key to view current
output power. To change, press ENTER
and use numeric keys to select desired
output power. The Clear key can be
used to reset the displayed entry to its
original value. Press ENTER when
correct output power is displayed.
Output Power (dBm)