ViaSat ArcLight User Manual Download Page 236

Page: 236 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-166 1081006

Rev.

001

Round Trip Delay Est. (us)

– Displays the estimated round trip delay

of the uplink signal.

Tx IF Input Power

– Displays the transmission IF input power.

Test & Alarm Status Panel

–

Test Status Indicators

– Displays the status of 13 test indicators. Tool

tips on the indicators give a description of each indicator.

Green = OK; Red = alarm.

Alarm State

– Displays the alarm state of the HC: Green = OK; Red =

Alarm

Most Recent Alarm

– Displays the alarm code, date, time, and name.

– Click on this button to close the screen and return to the

Hub

Diagram

Screen.

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 236 / 368

Search results

Summary of Contents for ArcLight

Reviews: