manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 275 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 275

 

ArcLight Hub User’s Guide

 

Component Operating Procedures  

Rev. 001 

1081006 

5-23

 

 

5.7 Support 

Server 

5.7.1 Overview 

The Support Server is used to monitor the status of the Hub equipment 
usually using COTS software such as IsItUp or SNMP OpManager. The 

Support server runs the APR server application, as well. The Support 
server resides on a blade server installed within the ArcLight Blade 

Center. 

The Support Server is a blade installed within the Blade System. 

 

 

Figure 5-18.  Support Server 

5.7.2 Physical 

Interfaces 

5.7.2.1 Ethernet Interfaces 

The Support Server’s front panel Ethernet interfaces are two RJ-45 

GigE 10/100/1000 Base-T interfaces complying with the physical and 
electrical characteristics of the IEEE 802.3 specifications, a COM1 port, 
two USB ports, a VGA port for connection to the KVM switch display, 

and a KB/MS port. 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments