ViaSat ArcLight User Manual Download Page 113

Page: 113 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-43

Figure 3-29. VMT Status – Management Tab Screen.

3.3.2.7.2 Management

Tab

From VMT panel:

Logins Attempted:

This parameter shows the total number of login

bursts (login attempt messages) transmitted by the Terminal to the
RtNMS.

Logins Succeeded:

This parameter shows the total number of login

acknowledgement messages received by the Terminal from the RtNMS—

in other words, the total number of successful logins.

Logins Failed:

This parameter shows the total number of login

attempts made by the Terminal which failed for any reason.

Last Attempted Login:

This parameter shows the time at which the

Terminal last successfully logged in, where a successful login is defined
as a login acknowledgement message being received from the RtNMS.

This time is measured in seconds since the standard POSIX epoch
(Midnight, Jan. 1, 1970).

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 113 / 368

Search results

Summary of Contents for ArcLight

Reviews: