manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 179 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 179

 

ArcLight Hub User’s Guide

 

Screen Descriptions for NMS Client  

Rev. 001 

1081006 

3-109 

 

3.3.16.2.6 Filter 

Events 

 

Event Streamer Filter Screen: 

 

The Event Streamer Filter Screen is displayed from the View drop-down 
menu on the Event Streamer window, select 

Filter…

 to display the 

Event Streamer Filter screen. It is used to set the parameters for 
filtering the event log entries presented in the display panel. The Event 

Streamer is updated in real time. 

 

 

Figure 3-70.  Event Streamer Filter Screen. 

 

View From

 – this panel is used to specify the start date and time of the 

displayed event log entries. 

Date

 – this field is used to specify the start date for the event log 

entries. The format is mm/dd/yyyy. 

Time

 – this field is used to specify the start time, on the start date, for 

the event log entries. The format is hh:mm:ss. 

View Through

 – this panel is used to specify the end date and time of 

the displayed event log entries. 

Date

 – this field is used to specify the end date for the event log entries. 

The format is mm/dd/yyyy. 

Time

 – this field is used to specify the end time, on the end date, for 

the event log entries. The format is hh:mm:ss. 

Event Type Panel

 – the check boxes in this panel are used to select the 

type of events that are listed in the Event Streamer display window. A 
check indicates the corresponding event type will be displayed. If all 

items in both the Level panel and Event Type panel are checked, the 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments