ViaSat ArcLight User Manual Download Page 196

Page: 196 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-126 1081006

Rev.

001

Miscellaneous panel:

SPCMs Sent:

This field lists the number of Summary Power Control

Messages sent by the RtNMS.

Cong. Ctrl Adj.:

This field lists the number of congestion control

adjustments.

APRs:

This field lists the number of automated updating of the location

of a mobile site.

APRs Today:

This field lists the number of APRs that have been

updated in a 24 hour period.

Sum. Rpt. Non-Com:

This field lists the number of summary reports

generated for non-commissioned sites.

Sum Rpt. Bad:

This field lists the number of summary reports

generated for bad sites.

Sum. Rpt. Rcvd:

This field lists the total number of summary reports

received.

OK button

– closes the current screen.

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 196 / 368

Search results

Summary of Contents for ArcLight

Reviews: