manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 222 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 222

 ArcLight Hub User’s Guide

 

Screen Descriptions for NMS Client

 

3-152 1081006 

Rev. 

001

 

 

Test Panel: 

Run Once:

 Click this button to run the FLM test once. 

Run Continuously:

 Click this button to test the FLM continuously 

until halted. 

Halt:

 Click this button to stop the testing process. 

 
 

  

 

Alarm Log (numOfAlarms Alarms) panel: 

 

Start Index:

 Enter the starting index number in this field. 

End Index:

 Enter the ending index number in this field. 

Alarm List:

 The box below displays alarms that have been generated 

during testing. If no alarms have been generated the text will read “NO 
ALARMS” 

Get Log Entries:

 Click this button to review all entries in the alarm log. 

Clear Log:

 Click this button to clear the alarm log of all entries. 

 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments