manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 144 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 144

 ArcLight Hub User’s Guide

 

Screen Descriptions for NMS Client

 

3-74 1081006 

Rev. 

001

 

 

ATI Bits 1-8 – 

These checkboxes from left to right enable/disable the 

ATI for:  

Green Bank, WV 

Socorro, NM 

Arecibo, PR 

Kitt Peak, AZ 

Owens Valley, CA 

North Liberty, IA 

Hancock, NH 

Los Alamos, NM 

ATI Bits 9-16 – 

These checkboxes

 

from left to right enable/disable the 

ATI for: 

Pie Town, NM 

Fort Davis, TX 

Brewster, WA 

Mauna Kea, HI 

Saint Croix, VI  

White Sands, NM 

ATI Bits 17-24 – 

These checkboxes are reserved as future placeholders 

to enable/disable the ATI. 

ATI Bits 25-32 – 

These checkboxes are reserved as future placeholders 

to enable/disable the ATI. 

 

 

OK

 – Click on this button to close the screen. 

Apply

 – Click on this button to apply the entries just made, and store 

the new data in memory. The current screen will remain open. A pop-
up error message will be displayed to warn the user if any information, 

required for the process being edited, is missing or out of an allowed 
range. Clicking OK and Apply will send data to the NMS Server (if 

applicable). 

Cancel

 – Click on this button to erase any new entries made on the 

open screen, close the current screen and revert to the next higher-level 

screen in the hierarchy. The next time the screen is opened the values 
that existed before the current editing session will appear. The Cancel 
button will not undo use of the OK or Apply buttons. 

 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments