ViaSat ArcLight User Manual Download Page 195

Page: 195 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-125

Figure 3-77. RtNMS Screen, Advanced Tab.

Advanced Tab:

Buffers panel:

Small Column:

This column lists categories for the small buffer.

Medium column:

This column list categories for the medium buffer

Configured:

This field lists the number of configured buffers.

Available:

This field lists the number of available buffers.

In Use:

This field lists the number of buffers that are in use.

High Water:

This field lists the largest number of simultaneously-

allocated buffers recorded by the RtNMS.

Unsuccessful:

This field lists the number of unsuccessful buffer

allocations for the small and medium buffers.

Allocates:

This field displays the total number of buffer allocations

performed over time.

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 195 / 368

Search results

Summary of Contents for ArcLight

Reviews: