ViaSat ArcLight User Manual Download Page 192

Page: 192 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

3-122 1081006

Rev.

001

Figure 3-75. RtNMS Screen Messaging Tab.

Messaging Tab:

Message Queues panel:

Columns:

These display the message queue categories for the NMS,

VMT, and Return (messages).

Currently Queued:

These fields display how many messages are

queued for each category.

Highest Queued:

This field displays the highest number of messages

that have been q

ueued during the interval.

Queue Max:

This field displays the setting for the maximum number of

messages that can be queued in each category.

Queue Waits:

This field displays the number of queue waits that have

occurred for each category.

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 192 / 368

Search results

Summary of Contents for ArcLight

Reviews: