manualshive.com logo in svg

ViaSat ArcLight, User Manual, Page: 168 / 368

Share
Download
ViaSat ArcLight User Manual Download Page 168

 ArcLight Hub User’s Guide

 

Screen Descriptions for NMS Client

 

3-98 1081006 

Rev. 

001

 

 

3.3.16.2.1  NMS Client Settings  

 

 

Figure 3-63.  NMS Client Settings Screen. 

 
 
NMS Client Settings screen: 

 

Hub Status Client Polling Rate (sec):

 This field displays the Hub 

Status Client polling rate in seconds. 

VMT Status Client Polling Rate (sec):

 This field displays the VMT 

Status Client Polling Rate in seconds. 

 

OK

 – Click on this button to close the screen. 

Cancel

 – Click on this button to erase any new entries made on the 

open screen, close the current screen and revert to the next higher-level 
screen in the hierarchy. The next time the screen is opened the values 

that existed before the current editing session will appear. The Cancel 
button will not undo use of the OK or Apply buttons. 

 

Summary of Contents for ArcLight

















































































































































































































































































































































































Reviews:

No comments