ViaSat ArcLight, User Manual, Page: 102 / 368

ArcLight Hub User’s Guide
Screen Descriptions for NMS Client
3-32 1081006 Rev. 001
Figure 3-23. IP Network Configuration screen – NAT Tab.
Name – Enter the name of the IP Network Configuration in this field.
NAT Tab -
The Network Address Translation (NAT) function, when enabled,
permits re-writing the source and/or destination addresses of IP
packets as they pass through a router or firewall. This enables multiple
hosts on a private network to access the Internet using a single public
IP address.
Enabled Box – Click on the check box to enable the NAT rule(s) listed
in the panel/table.
The panel lists the NAT rules that have been created.
Enabled – this column lists if the NAT rules that are enabled.
Type – this column lists the type of NAT rule.