ViaSat ArcLight User Manual Download Page 211

Page: 211 / 368

ArcLight Hub User’s Guide

Screen Descriptions for NMS Client

Rev. 001

1081006

3-141

Figure 3-85. MCD Configuration Screen - Logging Tab.

Name

- Displays the name of the ArcLight MCD and identifies if it is a

MCD I or MCD II.

IP Address

- Displays the hub management IP address of the ArcLight

MCD

Logging Tab:

Log Destination

- Select the log destination from the drop down menu.

Destination IP

- This field displays the destination IP address which

will be used for log file storage if any of the “remote file” options have
been selected.

Destination Path

- This field displays the destination path on the

remote file system which will be used for log file storage if any of the
“remote file” options have been selected.

Log File Size (kB)

- This field displays the file size of the log file in

kilobytes before rolling over to a new file.

Summary of Contents for ArcLight

















































































































































































































































































































































































Search results

Summary of Contents for ArcLight

Reviews:

ViaSat ArcLight, User Manual, Page: 211 / 368

Search results

Summary of Contents for ArcLight

Reviews: