VESPA 946 E4 EMEA 2021, Manual

Page: 62 / 283

TENT OF MOISTURE IN THE BRAKE FLUID EXCEEDS A
CERTAIN VALUE, BRAKING WILL BE INEFFICIENT.
NEVER USE BRAKE LIQUID FROM OPEN OR PARTIALLY
USED CONTAINERS.
UNDER NORMAL CLIMATIC CONDITIONS, REPLACE FLU-
ID AS INDICATED IN THE SCHEDULED MAINTENANCE
TABLE.
CAUTION
BRAKE CIRCUIT FLUID IS HIGHLY CORROSIVE: DO NOT
LET IT COME INTO CONTACT WITH PAINTED PARTS.
CAUTION
AVOID CONTACT OF BRAKE FLUID WITH EYES, SKIN,
AND CLOTHING. IN CASE OF ACCIDENTAL CONTACT,
RINSE WITH WATER.
N.B.
SEE THE BRAKING SYSTEM CHAPTER WITH REGARD TO
THE CHANGING OF BRAKE FLUID AND THE BLEEDING
OF AIR FROM THE CIRCUITS.
Recommended products
DOT 4 brake fluid Synthetic brake fluid.
SAE J 1703; FMVSS 116; ISO 4925; CUNA NC
956 DOT4
Locking torques (N*m)
Brake pump reservoir screw
15 - 20
Headlight adjustment
- Position the vehicle in running order and with the
tyres inflated to the prescribed pressure, onto a flat
surface 10 m away from a half-lit white screen; en-
sure that the longitudinal axis of the vehicle is
perpendicular to the screen.
- Turn on the headlight and check that the border
of the projected light beam on the screen is not
higher than 9/10 or lower than 7/10 f the height
from the ground to the centre of vehicle headlamp;
- If this is not the case, adjust the headlight by op-
erating the screw indicated.
WARNING
THE ABOVE PROCEDURE COMPLIES WITH THE "EURO-
PEAN STANDARDS" REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
Maintenance
Vespa 946 E4-E5 EMEA-USA-ASIA (2021-)
MAIN - 62