background image

 

Thank you for your purchasing

Robstep-M1

Robstep-M1

 is an intelligent robot that balances automatically product.

This User Manual

providing you information about how to assemble and use

Robstep-M1

safely, and how to maintain it . If

you want to get the most pleasure of riding

Robstep-M1

 , please read it carefully.

 

It is very important for you to know all safety notices and precautions before your first riding, then operating as required.

  M1 Product Manual

To avoid the possibility of losing control, collision or falling, we insist that

all customers should learn how to use Robstep-M1 securely and safely.

This Product Manual provides you all information about safety video and

road senses.

It is recommended that all consumers should follow the instructions mentioned in the   Product Manual, otherwise,

consumers should take full responsibility for all consequences.

Dongguan Robstep Robot Co.,Ltd

will not liable for

accident caused above and will reserve the right to the legal responsibility.

For further related service support, please refer to official website :(www.robstep.com)

Summary of Contents for Robin M1








































































Reviews: